View All YETI COOLERS Products

Yeti Tundra 35 Cooler

item # YT35


This item is available for In-Store Pickup Only. 

Ship to Home
  • The most portable of the series, the Tundra 35 is only small in dimensions, not on features. You can still pack 20 beers along with 28 lbs of ice in this miniature beast, and it will keep your brews safe from bears and at an ideal sipping temperature for days. To keep your ice intact day after day, the Tundra uses an interlocking lid system with a freezer quality gasket surrounding by two inches of pressure injected, commercial grade polyurethane insulation. This study beast has a never fail hinge system that cannot be over extended and will not fail you right when you need it most. You can even use the built in tie down points to lash the cooler to the deck of your boat to use the cooler as a casting platform, albeit a small one.
  • Features:
  • Rotomolded construction is virtually indestructible
  • Fatwall Design: Extra thick walls hold up to 2 inches of insulation for maximum ice retention
  • Permafrost insulation is pressure injected commercial grade polyurethane foam in the walls and lid
  • Certified bear proof if cooler is closed and padlocked at the two front corners by the Interagency Grizzly Bear Committee
  • T-Rex lid latches are heavy duty rubber
  • Neverfail hinge system has an interlocking design to prevent them from ever breaking
  • Coldlock Gasket is freezer quality and circles the length of the lid to block heat and retain cold
  • Interlocking lid system creates a better seal
  • LipGrip Handles stay out of the way and make hauling easier
  • Anchorpoint tie down slots are molded into the plastic for easy mounting to boats, trailers, or truck beds
  • DoubleHaul handles are made with military grade nylon rope with textured grips
  • BearFoot non-slip feet on the bottom prevent sliding
  • Vortex drain system is leak proof, rugged, and designed to completely drain the interior with a simple twist
  • 5 Year Warranty through Yeti
  • *****Pick-up in store only. Product shipment is not available for hard shell coolers.*****
  • Material: Rotomolded polyethylene
  • Insulation: Pressure-injected commercial-grade polyurethane foam
  • Weight: 20 lbs
  • Dimensions: 21 L x 16 W x 15.5 H inches (Interior 15 L x 10.5 W x 10 H inches)
  • Capacity: 7.2 Gallons (20 beer cans and ice)
  • Care: Everyday cleaning can be done wih a mixture of dish soap and water and tougher stains can be battled by using a pressure washer or a mixture of water and bleach (6:1 ratio) with a mildly abrasive scrubber.