Nordica Sizing

Ski Waist Width

This is the measurement at a ski’s width at the middle (waist) of the ski, which is usually the narrowest point. Narrower waist widths are quicker edge to edge during turns, while wider waist widths provide better flotation in powder and choppy snow.
 
You will usually see ski dimensions specified by a 3-number measurement for the tip/waist/tail, like 115/90/107mm. In this example 115mm refers to the tip width, 90mm refers to the waist width, and 107mm refers to the tail width. 
Turn Radius

Turn radius is the shape of a ski determined by its tip, waist, and tail width, usually expressed in meters. The narrower a ski’s waist is in relation to its tip and tail, the shorter the turn radius and therefore the deeper the sidecut. A ski with a deep sidecut (short turn radius) will make quicker turns, while a ski with a subtle sidecut (long turn radius) will turn more slowly and is typically more stable at high speeds. Some modern skis combine two or more radii on a single edge.
 
Turning radius Turn type Type of skiing, intermediate all-mountain
< 16m short carving
17-22m medium all-mountain, park & pipe
> 22m long powder, big-mountain







 

 

Rocker Type

Camber

This is the traditional profile for skis and snowboards. Camber is a slight upward curve in the middle of a ski or board, with the contact points - where an unweighted ski or board contacts the snow - close to the ends. Camber requires more precise turn initiation and offers superb precision with plenty of power on groomed terrain and harder snow. The rider's weight puts an even and concentrated pressure on the edge from tip to tail, resulting in increased edgehold and better "pop". Racers and high level park riders often prefer camber.


 
Rocker 
Rocker (also called reverse-camber) is just as it sounds – camber turned upside down. All skis and snowboards, rockered or cambered, when put on edge and weighted in a turn achieve reverse-camber. Cambered skis and boards produce more pressure on the snow at the tip and tail since they have to flex further to achieve this curve. The term rocker is borrowed from watersports where rocker is common. Rocker skis and snowboards offer superior float in the soft snow and increased ease of turn initiation with less chance of "catching" an edge. As skis in general get wider, rocker helps keep the new shapes maneuverable for a wider range of skiers. Wide ski and board shapes designed primarily for powder are often rockered.

 
Rocker/Camber
Rocker/Camber skis pair a traditional cambered profile underfoot with an elongated, early rise tip borrowed from fully rockered skis. This profile places the front contact point further back from the tip, while the rear contact point remains close to the tail. The rockered tip allows for better flotation in deep snow and a less catchy feel on hard, while the cambered rear stores and transmits energy similarly to a fully cambered ski and retains edgehold when your weight is over the tails. More and more all-mountain and big-mountain skis are being built with this profile. Because of its asymmetric shape, this profile does not ski switch as well as other profiles, but if you are looking for an all mountain charger that floats in the fluff without giving up too much hard snow performance, Rocker/Camber is a great choice.

 
Rocker/Camber/Rocker
Rocker/Camber/Rocker skis have the playfulness and float of a rockered ski as well as the added edge hold of a cambered ski. The contact points on skis with this profile are closer towards the middle of the ski than a fully cambered ski, but still not underfoot. The cambered midsection provides a longer effective edge on hardpack, increasing edge hold and stability, while the rockered tip and tail provide floatation in deeper snow and allow the ski to initiate and release from turns easier. This profile provides playfulness for park skiers, flotation for powder lovers, forgiveness for beginners and versatility for those who only have one pair of skis. Many ski manufacturers offer multiple types of Rocker/Camber/Rocker to accomodate different skiers, pairing different amounts of rocker and camber with different ski widths and sidecuts. 


 
Rocker/Flat/Rocker
Rocker/Flat/Rocker is another variation on the rocker theme that seeks to provide a little more hard snow edgehold and pop than full rocker while retaining ease of turning and float. Performance is between a fully rockered ski and a rocker/camber/rocker ski.


 
Other combinations of ski profiles include Flat/Camber/Flat Skis. We have done our best to make sense of all these different combinations, but keep in mind that companies will combine the above profiles in different ways, sometimes inventing creative names like "Mustache," "reCurve" and "Jib Rocker" to market them. 
 
So what is better? The answer: No one profile beats the other and it really comes down to your personal preference. Typically, camber offers better edge hold and stability on hard pack and at high speeds, while rocker offers more float in the powder and a more forgiving ride. Some rocker can be great for beginners because it facilitates easier turn initiation. Advanced riders who like a loose feel may also enjoy riding rockered skis.
 
Favorite Terrain
 
You will find that the lines between different types of skis are more and more blurred these days so that many skis fall under more than one category.
 

All-Mountain Skis

As the name suggests, all mountain skis are for skiing the entire mountain. They are designed to handle anything you throw at them including powder, ice, groomers, steeps, heavy snow, and everything in between, but they aren’t necessarily a master of any one terrain or snow type. If you’re only going to own one ski to do it all, this is what you want. That said, all-mountain skis come in a range of shapes and widths to match the specific needs of different skiers. All-mountain skis generally have what we call mid-fat waists that range from 80-110mm. The key is to figure out where you will be spending the majority of your time on the mountain and what type of terrain you like to ski most. Remember, it’s not just about what you ski now but what you aspire to; trust us, today's skis can help you make leaps in ability that will blow you away. 
 
 
Powder Skis
These skis are for the deep days. If you like to find powder stashes at your local resort, go on backcountry missions for the freshest of fresh or heli ski trips to BC, powder skis are what you need to stay afloat. Skis in the powder category are wide (115 mm or more in the waist) and most often have some form of rocker or early rise plus a relatively soft flex. Some have unique sidecut shapes like reverse sidecut; the tip and tail are not always the widest parts of the ski. Many powder skis today are versatile enough to handle mixed conditions and harder snow.
 

Big Mountain Skis
Big mountain skis are designed for charging big lines with high speeds and big airs. These skis vary in width from wide, powder-oriented skis for skiing Alaska spines to narrower, mixed condition skis for ripping the beat up headwall at your local mountain. Skis in this category tend to be on the stiffer and heavier side, often with more rocker in the tip and less in the tail. 

 
Carving Skis
For those that like the classic feeling of laying a ski over on edge and arcing a perfect turn, carving skis are what you want. These skis have narrower waists and shorter turn radii for edge to edge quickness and responsive turn initiation and exit on groomed runs and hard pack. The beginner-intermediate skis in this category are designed to make learning how to turn as easy as going from pizza to French fries.
 
 
Park & Pipe Skis
Park and pipe skis, often called freestyle skis, are for skiers who spend the majority of their time in the terrain park. If jumps, rails, and jibs of all kinds are your thing then check out this category. Though traditionally park and pipe skis have narrower waists with full camber profiles, this category is incorporating more rocker patterns and different shapes. You will almost always find these skis with twin tips as well as other park specific features like thicker, more durable edges, dense extruded bases, and butter zones.

 
Alpine Touring Skis
Also known as backcountry skis, alpine touring (AT) skis are designed for going uphill as well as downhill. These skis are typically light for their width and many feature fittings that accept climbing skins. AT skis vary in width and weight, with the wider heavier versions usually used for winter/deep snow touring and the skinnier, lighter skis usually used for spring/summer/long distance touring.
 
 
Women-Specific Skis
Skis designed specifically for women are typically lighter, softer, and shorter. Women usually have a lower center of gravity and less body mass than men of the same height and therefore exert less leverage and force on their skis. Women’s skis require less force to power and turn; this is accomplished by using thinner, softer cores and less laminate layers in the construction. Also, to tailor the performance to women, mounting positions are often a centimeter or so further forward on these skis. There are plenty of hard charging skis built for women these days and the graphics often feature fewer trucks, skulls and blood than men’s graphics. Of course there is no reason a female skier cannot ski well on a men’s ski, and vice versa.

 
System Skis
System skis come with bindings in one convenient package. They use a plate or plates that require a specific model of binding. System bindings usually do not come attached to the skis, and you should always have a certified technician adjust your bindings to your boots.
 
 
Click Here to Return to Noridca Products Page